← All guides · Workflow Data Calculator

FX3 / FX6: Sony RAW bitrate & storage per hour

The Sony FX3 / FX6 records Sony RAW. Maximum sustained write speed: 600 MB/s. Figures per sensor mode and compression level at 24 fps — video only.

Figures at 24 fps. Other frame rates scale linearly — open the calculator to change them.

4.2K RAW HDMI (4264×2408, max 60 fps)

CompressionRatioBitrateData rateStorage / hour
HQ2:1680.0 Mbps85.00 MB/s306.0 GB
SQ3:1440.0 Mbps55.00 MB/s198.0 GB

4K DCI (4096×2160, max 60 fps)

CompressionRatioBitrateData rateStorage / hour
HQ2:1585.9 Mbps73.24 MB/s263.7 GB
SQ3:1379.1 Mbps47.39 MB/s170.6 GB

4K UHD (3840×2160, max 60 fps)

CompressionRatioBitrateData rateStorage / hour
HQ2:1549.3 Mbps68.66 MB/s247.2 GB
SQ3:1355.4 Mbps44.43 MB/s159.9 GB

Full HD 1080p (1920×1080, max 60 fps)

CompressionRatioBitrateData rateStorage / hour
HQ2:1137.3 Mbps17.17 MB/s61.8 GB
SQ3:188.9 Mbps11.11 MB/s40.0 GB

Cards and recording time

The FX3 / FX6 sustains up to 600 MB/s, so its media has to keep up with the mode you shoot. At the highest rate in the tables above (85 MB/s) the recording times per card are:

CapacityRecording timeCards for 1 hour
64 GB13 min5
128 GB25 min3
256 GB50 min2
512 GB1 h 40 min1
1 TB3 h 16 min1

Offloading a shooting day

90 minutes of takes come to about 459.0 GB. Over USB 3.2 Gen 2 (10 Gbps) that is 9 min for a single copy — double it if you verify with checksums, and multiply by the number of backups.

What hardware it needs

Playing this back in real time means sustaining 85.00 MB/s of reads. One hour of footage is 306.0 GB, and that is what has to travel every time you copy, back up or archive it.

Any card or drive rated below 85 MB/s sustained will drop frames on playback, whatever its peak speed says on the box.

InterfaceSustained speedCopying 1 hour
1 GbE network (1 Gbps)110 MB/s46 min
USB 3.2 Gen 1 (5 Gbps)400 MB/s13 min
USB 3.2 Gen 2 (10 Gbps)850 MB/s6 min
Thunderbolt 3 / 4 (40 Gbps)2500 MB/s2 min

Times are for a single copy without checksum verification. Verified offload reads back what it wrote, so it takes roughly twice as long.

Related guides

Figures use decimal units (1 GB = 1000 MB), the convention used by drive and camera manufacturers. Computed with the same calculation engine as the Workflow Data Calculator — open it to add audio, streams, backup copies, offload time and storage cost, or to export a PDF report.

Designing workflows like this every week?
Certified Adobe & Blackmagic training and postproduction workflow consulting by Jorge Mochón — jmochon.training